Growatt APX 60 kWh – two full clusters of 30 kWh
Growatt APX 60 kWh is the largest family configuration Growatt APX HV Battery 2.0 is now available. It consists of two complete systems. APX 30.0M-S3 working in parallel: two master modules APX 5.0M-B3 and ten battery modules APX 5.0P-B3, six modules in each of the two columns. Both columns are filled to the maximum capacity of one master module.
Set composition 60 kWh
Configuration 60 kWh are two clusters working in parallel, twelve elements in total: two master modules APX 5.0M-B3 i ten battery modules APX 5.0P-B3Each cluster has its own master module with battery management and its own capacity of 5 kWh in this module.
- Cluster 1 - 30 kWh (APX 30.0M-S3): 1 × APX 5.0M-B3 + 5 × APX 5.0P-B3.
- Cluster 2 - 30 kWh (APX 30.0M-S3): 1 × APX 5.0M-B3 + 5 × APX 5.0P-B3.
We've chosen the division so that each column individually matches the configuration on the catalog card. The card doesn't dictate this, and the columns don't have to be of equal capacity—we confirm the configuration when ordering.
The base is included. The master module comes pre-assembled with the base, and the packing list includes the base and wall mount—no need to purchase a stand or a separate battery management box.
A three-phase smart meter is included in the set. This is a three-phase smart meter Growatt for energy measurement, index 00005 in our catalogue. It does not need to be purchased separately. See the meter card
Single-phase installation? This kit will replace your meter at no extra charge. It has a three-phase meter, and the series instruction manual (chapter 1.1) mentions cooperation APX 2.0 also with single-phase inverters MIN-XH i MIN-XH2If this kit is for a single-phase installation, we will replace the meter with a single-phase one at no extra charge—just specify this in the "Order Notes" field when placing your order. The replacement applies to this kit: the master module and battery module, purchased separately, do not include the meter.
The complete set of cables runs in the master module — the cascade cabling cannot be purchased separately; this is commercial information PVGroup.pl, not a record from a catalog card. A separate item remains connecting element (adapting piece), i.e., the mechanical connection of two columns: the master module accessories bag contains only M6 expansion bolts and M4 screws. This item is not in the catalog today PVGroup.pl — please contact us before ordering.
How many clusters can be connected? The instructions provide for a cascade of two or three systems APX M-S3, and the limit is set by the inverter: series MID-HU supports up to three clusters, series MID-XH – up to two. For the MOD series, the manual doesn't specify this, and we haven't verified it. This configuration runs on two clusters, so it falls within both documented limits.
Who is this capacity for?
- Production plants and industrial facilities - 60. kWh this is a full day of operation of many installations while limiting peak consumption.
- Installations with a high share of self-consumption — the largest stock available in our configuration range APX 2.0, in two clusters.
- Objects with extensive support — two independent clusters, each with its own master module and its own battery management.
Twice APX 30.0M-S3 — parameters and constraints
Configuration 60 kWh these are two systems APX 30.0M-S3. Each has a maximum power of 15 kW and a peak power of 21 kW for 10 seconds on three phases, and 10 kW and 14 kW on single phases. The card does not provide parameters for both clusters together, so we do not declare the totals.
Key specifications
| Growatt APX 60 kWh — specification | |
|---|---|
| Number of modules | 2 × APX 5.0M-B3 +10× APX 5.0P-B3 |
| Set type | 2 × APX 30.0M-S3 |
| Cell chemistry | LFP |
| Nominal voltage | 400V (1-phase) / 750V (3-phase) |
| Battery voltage range | 350-550V (1-phase) / 660-980V (3-phase) |
| Max charge and discharge current | 28,6 A (1-phase) / 22,73 A (3-phase) |
| Management / BMS | APX 5.0M-B3 |
| Communication | CAN / RS485 |
| Level of security | IP66K |
| Assembly | floor |
| Working temperature range | −20 °C … 55 °C |
| Cooling | natural |
| Dimensions (W×H×D) | 2 × 590 × 1750 × 255 mm |
| Weight | 556,4 kg |
| Development | 35–60 kWh |
| Compatible inverters | MIN-XH, MIN-XH2, MOD, MID |
| Warranty | 10 years |
The values are from the catalog card Growatt APX 5.0-30.0M-S3 (revision 2026-07) and from the series user manual; the cells are recorded on the data sheet as Cobalt Free Lithium Iron Phosphate. The data sheet does not provide maximum or peak power for a dual-cluster configuration, therefore these rows are not included in the table. The data sheet does not include depth of discharge, round-trip efficiency, or number of cycles.
Certificates and standards
Catalog card lists for the system APX 5.0-30.0M-S3 following standards and certificates: IEC62619(Cell&Pack) / IEC60730 / IEC62477-1 / IEC62040-1 / CE(EN61000) / UN38.3 / IEC60529 / REACH / CEC. We will send the certificate in the form of a document on request.
Installation and working conditions
Double-cluster operation is only permitted for floor installation. Both columns measure 590 × 1750 × 255 mm and weigh 278,2 kg each. With two columns of this height and a combined weight in the hundreds of kilograms, the floor's load-bearing capacity and internal transport route should be checked before ordering, not on the day of installation.
- Degree of protection IP66 and natural cooling, without fans.
- Operating temperature range from -20 to 55 °C — the card lists the heating foil as part of the system equipment.
- Relative humidity 5–95% and work up to 4000 m above sea level.
- Distance between columns 150 mm, and from the wall 25–40 mm - dimensions from the instruction manual for a two-column system.
Compatible inverters
The user manual indicates cooperation with single-phase inverters of the MIN-XH and MIN-XH2 series, and with three-phase inverters - with the MOD and MIDThese are the only families listed in the manufacturer's document and we only declare them.
The inverter is the second system limitation, next to battery capacity. The data sheet stipulates that the system's power is limited by the inverter's maximum charge and discharge power. Submit your inverter model and we'll confirm the kit before purchase. If the inverter isn't already in your project, start with the three-phase hybrid inverters category.
B2B warranty and support
The catalog card gives the series APX 2.0 ten-year warranty. Equipment purchased in PVGroup.pl is covered by a European service warranty, technical documentation for downloadInstallers and integrators can log in and see net prices with a wholesale discount. Lithium cells are subject to hazardous goods transport regulations.
Adjacent capacities of this series: Growatt APX 55 kWh and Growatt APX 50 kWh. Full range of magazines in the category Energy storage.
Most frequently asked questions
Is it 60? kWh is the maximum capacity of the system APX 2.0?
This is the maximum in our offer, but not the maximum of the architecture: one cluster can accommodate up to 30 kWh, and the manual allows for a cascade of two or three systems APX M-S3, depending on the inverter.
Do I need to purchase additional equipment for two-cluster operation?
No cables - the complete wiring is in the master module (commercial information PVGroup.pl). A separate item is the connecting element (adapting piece), which mechanically connects the two columns; the master module accessories bag only includes M6 expansion bolts and M4 screws. This item is not currently in the catalog. PVGroup.pl — please contact us before ordering.
How many modules does a 60-unit warehouse consist of? kWh?
Out of twelve: two master modules APX 5.0M-B3 and ten battery modules APX 5.0P-B3, six elements in each of the two columns. The set also includes a three-phase smart meter. Growatt, in our catalogue index 00005 - no need to purchase it separately.
What to do if your property needs more than 60 kWh?
There are two ways: the third cluster at the series inverter MID-HU, which we don't currently have in our catalog and priced individually, or another product class—rack systems or battery cabinets. Please send us your consumption profile and inverter model.
I have a single-phase installation - does this kit make sense?
Yes. The series user manual (chapter 1.1) mentions cooperation APX 5.0-30.0M-S3 with single-phase inverters MIN-XH i MIN-XH2This kit includes a three-phase meter. If your installation is single-phase, we'll replace it with a single-phase meter at no extra charge. Simply specify this in the "Order Notes" field when placing your order. This replacement is for the kit; the master module and battery module, which are purchased separately, do not include the meter.
Opinions
There are no reviews yet.